Sealcoating Your Commercial Asphalt — A Step-by-Step Guide from an Asphalt Sealcoating Contractor in Kissimmee, Florida

Asphalt sealcoating contractors in Kissimmee Florida

Sealcoating Your Commercial Asphalt — A Step-by-Step Guide from an Asphalt Sealcoating Contractor in Kissimmee, Florida

If you want to get the most out of your newly installed asphalt surface, sealcoating is key. It enhances the appearance of your property and acts as a protective layer, preventing damage from water, oil, and other harmful substances.

Are you interested in learning about the asphalt seal coating process? If so, you’ve come to the right place. This asphalt sealcoating contractor in Kissimmee, Florida is going to explain below.

Step 1: Preparation

Before applying sealcoating, the surface must be clean and clear of any debris that could interfere with the sealcoating process. This involves using a power blower or broom to sweep away any loose debris, followed by a thorough pressure washing to eliminate any lingering dirt, oil, or other pesky substances.

Step 2: Repairs

No matter how well you maintain your asphalt surface, cracks and potholes are inevitable over time. That’s why it is essential to repair any damage to the surface before applying the sealant.

Your asphalt sealcoating contractor in Kissimmee, Florida will inspect your surface carefully to identify any areas needing repair. If there are any cracks or potholes, they will fill them with high-quality asphalt patching material and allow it to dry completely before moving on to the next step. This ensures that your surface is smooth even before the professional applies the sealcoating for the best possible results.

Step 3: Masking

Masking is crucial to ensure that the sealcoating material only goes where it should, resulting in a precise and professional finish. In this step, the areas that should not be coated with sealant are covered to protect them from the sealcoating material. These areas could include curbs, sidewalks, or other spots that don’t need to be coated.

Step 4: Sealcoating Application

The sealcoating material can be applied using a variety of methods — each carefully selected to suit the specific needs of your commercial property. From spray application to squeegee application, an experienced asphalt sealcoating contractor in Kissimmee, Florida will know just the right technique to apply the perfect amount of sealcoating material.

They will carefully assess the size and condition of your asphalt surface to determine the most effective approach. Once the method is decided, your contractor will apply the sealcoating material in two thin coats, ensuring a seamless and impeccable finish.

Step 5: Drying

Patience is key in the final step of the sealcoating process: drying. Once the sealcoating material has been applied, it needs time to dry and cure properly before the surface can be used again.

It is crucial to wait for the sealcoating to dry completely before allowing any traffic on the surface. The drying time may vary depending on factors such as temperature, humidity, and the thickness of the sealcoating. But trust us — the wait is worth it. The newly sealcoated surface will look fresh, vibrant, and ready to take on the elements for years to come.

Step 6: Striping and Marking

With the sealcoating process complete and the surface fully dried, it is time to add the finishing touches. This step involves striping and marking the surface, which can transform a plain asphalt surface into a well-organized parking lot or a clearly marked roadway.

From adding parking spaces to directional arrows, striping and marking are critical aspects of the asphalt sealcoating process. These markings ensure drivers and pedestrians can safely and efficiently navigate the surface.

The striping and marking process requires precision and care to ensure the markings are clear, easy to read, and correctly positioned. So, if you want to make a good impression on your customers or visitors, you shouldn’t overlook this final step of the sealcoating process.

Looking for an Asphalt Sealcoating Contractor in Kissimmee, Florida?

Are you looking for a reliable asphalt sealcoating contractor in Kissimmee, Florida? If so, All Asphalt Services, Inc. is here to help. We understand that time and budget are essential when it comes to your project, which is why we work tirelessly to ensure that each job is completed with the utmost quality and efficiency.

Contact us today to discuss your asphalt sealcoating needs.

No Comments

Sorry, the comment form is closed at this time.