Asphalt Milling Services in Tampa, Florida

Asphalt milling machine on a road in Tampa, Florida

Asphalt Milling Services in Tampa, Florida

Asphalt milling is an affordable solution for asphalt pavement restoration. It is often used as a dependable and affordable alternative to repaving or complete demolition. Compared to the traditional asphalt pavement processes, asphalt milling is a relatively newer industry development. It began in the mid-1970s and has today become one of the most economical and sustainable ways of providing asphalt pavement restoration for municipalities and business owners.

Below, the experts at All Asphalt Services are going to discuss everything you need to know about asphalt milling services in Tampa, Florida:

What Is Asphalt Milling?

Asphalt milling, A.K.A. cold planing, is the process that removes a layer or two of an existing paved surface to repair or level the damage it may have incurred. It resurfaces or overlays the pavement with large capacity grinders, targeting only the damaged surface and leaving the sub-base intact.

Asphalt milling can be necessary if the pavement has started to:

  • Break apart at the top layer of asphalt
  • Unravel from top to bottom
  • Show low to moderate alligator cracks
  • Allow water to penetrate into the pavement, causing significant deterioration

The process uses heavy-duty construction equipment, or a cold planer, with large rotating drums that remove and grind the asphalt surface. The exterior of the drum is covered by scrolls of tool holders and clutch carbide cutters to cut the pavement and automatically move it back to the center.

Usually, a front-loading conveyor system loads the pavement. Water is occasionally applied to the drum if there is excess heat or any airborne dust caused during the milling process.

Why Choose Asphalt Milling?

Affordability and sturdiness are the two major reasons why asphalt milling is one of the best methods for pavement restoration. Here are more of its benefits for municipal and commercial purposes:

Cost-Effective: Compared to reconstruction, asphalt milling is much affordable for resurfacing cracks and uneven slopes. It removes the affected layers and replaces the same with a new hot mix.

Environment-Friendly: As the process uses crushed asphalt, the carbon footprint is much lower than other paving materials. Asphalt is milled, collected, and transported to a recycling facility to be used as aggregate in a new hot mix. Plus, it is a no-smoke, no-flame, and low-dust procedure, making the process much more environmentally friendly than alternative methods.

Sustainable: The process generates a 100% recyclable pavement that may be used in place of aggregate in new asphalt material.

Time-efficient: Under most circumstances, the process needs minimal traffic interruption, making the surface safe to use soon after the job is complete. Larger machines can even cut up to around 15,000 square yards in a day, which makes it great for streets, parking lots, highways, or runways.

Improves the Surface: The process helps restore the surface and save it from further damage. It restores the drainage flow and the curb-reveal for parking areas or roadways. If you have an uneven and bumpy surface, the pavement can be transformed without having to reconstruct from scratch.

How All Asphalt Services Can Help?

Asphalt milling, as a process, has come a long way. It is the easiest, quickest, and most affordable method for maintaining safe and attractive pavements.

If you are unsure whether asphalt milling is the right choice for you, All Asphalt Services can conduct an on-site evaluation to uncover more details. We are Florida’s number one asphalt contractor, providing superior asphalt milling services. With more than 30 years of industry experience, we have the skills and state-of-the-art machinery to accommodate all your commercial asphalt needs.

Just give us a call at 813.654.8383 for a free consultation on asphalt milling and resurfacing in Tampa, Florida.

No Comments

Sorry, the comment form is closed at this time.