24 Jun The Step-by-Step Guide to Getting Your Parking Lot Ready for Sealcoating: Insights from an Asphalt Sealcoating Contractor in Orlando, Florida
Parking lots are a major investment, which is why it’s important for property owners to do everything possible to protect their surface. Many property owners choose to have their parking lot sealcoated. Any asphalt parking lot will better withstand severe weather and the corrosive effects of automotive pollutants if it has been treated with a sealcoat.
Sealcoating reduces the risk of asphalt turning gray, brittle, and cracking, and it significantly increases the lot’s overall lifespan, among other benefits. In short, sealcoating could save you both time and money.
Are you thinking about sealcoating your parking lot? If so, you’ve come to the right place. This asphalt sealcoating contractor in Orlando, Florida is going to provide a step-by-step guide on how to prepare your parking lot before applying a sealcoat.
Assess the surface.
A closer look at the lot’s surface will help you identify signs of deterioration, including cracks, holes, and oil stains. The point of accurately identifying any existing damage is to ensure that you overlook none of it when sealcoating your parking lot.
Note: Despite any apparent signs of wear and tear, your parking lot might not need to be sealcoated if it was installed within the last two years. If you’re not sure whether your lot could benefit from sealcoating, you can schedule a free assessment with your local asphalt sealcoating contractor in Orlando, Florida.
Check the forecast.
If rain is in the forecast, you might want to reschedule your sealcoating appointment. Also, it’s important to consider the current temperature. Asphalt can only be sealed when the surface temperature is over 50℉. If you do not follow these instructions, you might end up with improperly or inadequately sealed pavement.
Clear and prepare the area.
It is crucial to start sealing your parking lot by first clearing and preparing the surface. Be sure to clear all types of debris from the surface, such as loose pebbles and leaves. You should also remove cars, bicycles, and trash cans. Also, clear the asphalt of any chalk or fertilizers. Since the sealer will not adhere to a dirty lot, a clean surface is crucial.
If you have sprinklers, you should turn them off a full day before the sealcoating process, and you should not turn them back on for another full day after the process has been completed.
Check to see that you do not have any deliveries planned. During the process of sealcoating, your lot will be inaccessible. You’ll want to make sure you change the delivery date or make other arrangements for where they will be dropped off.
It is important to keep people away from the surface immediately after asphalt sealcoating contractor in Orlando, Florida has treated the surface.
Prime the surface.
Priming the parking lot is yet another step that must be taken before your asphalt sealcoating contractor in Orlando, Florida can begin working.
The sealcoating application will have a better chance of success if you first prime your parking lot by removing any oil stains. First, wash the surface with a low-pressure nozzle tip attached to a pressure washer or a garden hose. Next, scrub the pavement with a hard/stiff push broom. Clear the soap residue with clean water and then wait for the surface to dry completely before applying the primer.
Looking for the Top-Rated Asphalt Sealcoating Contractor in Orlando, Florida?
Are you ready to have your asphalt parking lot sealcoated? If so, and if you’re looking for the top-rated asphalt seal coating contractor in Orlando, Florida, look no further than the professionals at All Asphalt Services Inc. We have been the leading asphalt repairs company for commercial property owners throughout the greater Orlando area for more than 35 years. Contact us today to request a free estimate.