09 Jun Things You Should Know Before Installing a New Parking Lot: Insights from an Asphalt Paving Contractor in Jacksonville, Florida
There is no denying that installing a new parking lot is a big financial commitment. Before you have a new asphalt surface installed at your commercial property, it’s important to take your time and work through all the details.
There are a few key things you should know prior to installing a new parking lot. This asphalt paving contractor in Jacksonville, Florida is going to explain below.
It’s important to set a realistic budget.
One of the most common things that businesses tend to underestimate is the amount of money required to pave a new parking lot.
The actual cost of ownership of a parking lot is far more than the initial investment, which is only a tiny fraction of the overall cost. When setting a budget for a new parking lot, it is crucial to consider all the aspects, including ongoing maintenance and repairs and eventual resurfacing or replacement. The good news is that, if a parking lot is well-cared for by an asphalt paving contractor in Jacksonville, it can last anywhere from 15 to 25 years.
Asphalt can be installed relatively quickly and at a lower cost than concrete — which is one of the primary reasons why it’s the material of choice for paving parking lots.
To effectively lay down the foundation for your asphalt parking lot, you will need to hire a professional asphalt paving contractor in Jacksonville, Florida. This will ensure that your asphalt parking lot is long-lasting and durable. This entails preparing the running base and ensuring that rainwater storage, drainage, and filtration are given careful consideration. And even if everything is done well, you will still need to account in your budget for the possibility of damage from standing water, cracks, potholes, and fading lot lines.
The type of surface you choose could have an impact on the environment.
There is a great deal of misinformation out there about asphalt production, asphalt products, and asphalt’s impact on the environment. If you have your lot paved with “regular asphalt” rather than porous asphalt, warm-cold mixed asphalt, cold recycled asphalt, perpetual pavement, or permeable pavers, it could have a negative impact on the environment.
Because regular asphalt is considered an “impervious surface,” it does not allow water through it and into the ground below. Therefore, when it rains, water falls onto the pavement, runs off it, and brings surface pollutants like gas, oil, or automotive chemicals along with it. The runoff water is then directed into storm drains, which could potentially contaminate water supplies, lakes, and riverbeds.
When it comes to asphalt production, mixing plants are subject to stringent regulations from environmental agencies in charge of putting in place the emission control systems.
Petroleum asphalt is a highly volatile organic compound (VOC), which — when converted into asphalt — does release toxic gasses into the atmosphere. However, the total emissions from asphalt are considered minor sources of industrial pollution because their emissions have been cut by as much as 97% since the introduction of asphalt recycling. If you have any questions about the type of asphalt you would like to use for your parking lot, do not hesitate to contact your asphalt paving contractor in Jacksonville, Florida.
Looking for a Full-Service Asphalt Paving Contractor in Jacksonville, Florida?
Installing a new parking lot is a big decision for any business — not only because of the expenses involved, but also due to its potential environmental impact. As a full-service asphalt paving contractor in Jacksonville, Florida, All Asphalt Services Inc. is here to help you choose the asphalt paving option that will work best for your newly built parking lot. We can respond to any questions you may have about asphalt paving, offer a free quote, and explain the advantages of one type of asphalt over another. Contact us today to discuss your project.